N° 01Classic green
UV resistant
5 photos
Vertical garden BASiC greenery you install in an afternoon, indoors and out
14 models of 1 m² modular panels for indoor walls, ceilings, offices, shops and venues, as well as terraces, fences and outdoor walls: they clip together, can be cut to size and stay green all year round, with no water and no maintenance.


The vertical garden ready to clip on
BASiC is our line of pre-configured 100×100 cm modular panels: the foliage is already composed on a grid with clip fastenings. Place the panels side by side, join them and fix them: in a few hours a bare wall becomes a dense, realistic green wall.
- Above all indoors: home walls, offices, receptions, shops, restaurants and hotels, and also on ceilings for green ceilings and pergolas (always with mechanical fixing).
- Easy to cut from the back to follow niches, edges, columns and technical points.
- UV resistant, outdoors too: protected against UV rays, with UV stability guaranteed for 5 years outdoors. For terraces, balconies, fences, boundary walls, outdoor dining areas and pergolas.
- They can also be fixed with simple cable ties to mesh, trellis or a rigid structure.
- No water, no pruning, no dry leaves: always perfect greenery.
BASiC is not LUX. BASiC are standard 100×100 cm modular panels, affordable and quick to install. The custom-made LUX line is something else: an OSB base shaped to your wall and leaves fixed by hand, chosen together with you. Discover LUX technique
Choose your green
From the thinnest, for a fence, to the deepest, with a jungle effect. Tap a model to see all the photos, sizes and available formats.
N° 01Classic green
UV resistant
5 photos
N° 02Classic green
UV resistant
5 photos
N° 03Classic green
UV resistant
5 photos
N° 04Classic green
UV resistant
5 photos
N° 05Classic green
UV resistant
5 photos
N° 06Tropical
UV resistant
5 photos
N° 07Indoor only
5 photos
Fire Resistant M1
Fire certified: compliant greenery for public venues
The FIRE RESISTANT version of the BASiC line: panels certified for reaction to fire, class M1 under French standards and B-s1,d0 under the European Euroclass. 3D ferns in green, yellow, beige and mauve with a depth of 9 to 25 cm. The right choice where fire certification is required: restaurants, hotels, shops, offices, gyms and venues open to the public.
N° 08Tropical
UV resistant
5 photos
N° 09Tropical
UV resistant
5 photos
N° 10Colourful
UV resistant
5 photos
N° 11Colourful
UV resistant
5 photos
N° 12Colourful
UV resistant
5 photos
N° 13Colourful
UV resistant
5 photos
N° 14Flowering
UV resistant
5 photos
N° 15Ceilings & pergolas
UV resistant
5 photos
Cascata
Trailing greenery for ceilings and pergolas
Foliage trailing down up to 50 cm for green ceilings, pergolas, gazebos and cascading walls. Over 2,000 leaves per square metre in green, orange, yellow and purple. On ceilings it must always be fixed mechanically.
On ceilings glue alone is not enough: a load-bearing structure with distributed mechanical fixings is required.
No models in this category.
How far does it stick out from the wall?
Depth is the thickness of the foliage in front of the grid. A few centimetres for narrow passages and balconies, 30–50 cm for striking feature walls.
A panel, a box or a pallet
Each model is available in several pack sizes. The more square metres you take, the better the price: for large surfaces and contract projects we prepare a dedicated offer.
Single panel
100 × 100 cmFor small corners, a balcony, a planter to hide or to complete a wall. It clips onto the neighbouring panels with no visible joins.
Box of 5
5 panels · 1 boxThe most popular format for terraces, fences and house walls. It arrives in a single box, ready to install.
Pallet of 50
50 panels · contract offerFor boundary walls, façades, hotels, restaurants and building sites. The most cost-effective solution, delivered on a pallet.
Sun, rain, wind: always green
As well as indoors, BASiC panels are UV resistant and live outside all year round. No irrigation system, no lighting, no pruning.
How many panels do you need?
Enter the wall size: we tell you how many panels you need and the most cost-effective format. Then send it all to us on WhatsApp with one tap and we will reply with a quote.
Surface 8 m²
- Recommended format—
- Model—
- Depth from the wall—
- PriceOn free quote
The price depends on model, quantity, transport and any installation: send us the calculation and we will prepare a free, detailed quote, with no obligation.
Four steps, no special tools
With a little DIY skill you can install it yourself. If you prefer, we come to you: ask us for a quote including installation.
Measure
Width × height = square metres, i.e. the number of panels. Also check the free depth: some models stick out up to 35 cm.
Lay out on the floor
Spread the panels on the floor, choose the direction of the foliage and join them with the grid clips, without forcing.
Fix
Tie the grid to the support with cable ties or screws with washers: corners, edges, joins and centre. Outdoors, reinforce the top row.
Cut and finish
Cut from the back around obstacles and edges, then open the leaves by hand to hide the joins between panels.

Fences, mesh, trellis and walls
BASiC panels can be fixed to any solid support: wire mesh, fence, wooden trellis, battens or a rigid board fixed to the wall. On a solid wall they are mounted on battens or a support board, so that air circulates behind the greenery.
The panels are not self-supporting: they must always be fixed to a suitable rigid structure. They do not replace the fence, they dress it. On ceilings mechanical fixing is always required: glue alone is not enough.
Frequently asked questions
Can they be used indoors and on ceilings?
Yes, in fact it is the most common use: home walls, offices, receptions, shops, restaurants and hotels. On ceilings (also pergolas and gazebos) they must always be mechanically fixed to a load-bearing structure: glue alone is not enough. For ceilings there is also the Cascata model, with foliage trailing down up to 50 cm, and for venues open to the public the fire-certified Fire Resistant M1 version.
What is the difference between BASiC and the custom-made LUX vertical garden?
BASiC are standard 100×100 cm modular panels, already composed: they clip together, can be cut and are installed quickly. LUX is our custom-made vertical garden: an OSB base shaped to your wall and leaves fixed by hand, chosen together with you. They are two different products: you will find all the LUX specifications on the Technique page.
How much does a BASiC vertical garden cost?
It depends on the model, the square metres, the format (panels, boxes or pallets), transport and any installation. That is why we prefer to prepare a free tailored quote: send us the size and a few photos of the wall on WhatsApp or by email and we will reply with the best offer for your project.
How many panels do I need?
Each panel covers 1 m². Multiply the width × height of the wall and round up; if there are cuts, corners or windows, add a small margin. The calculator above does the maths for you and suggests the most cost-effective format (panel, box of 5 or pallet of 50).
Are they UV resistant? Do they really last outdoors?
Yes. All BASiC outdoor models are UV resistant: the polyethylene leaves are protected against UV rays, with UV stability guaranteed for 5 years outdoors, and the declared wind resistance is up to 150 km/h. Durability also depends on correct fixing: outdoors, reinforce the top row and the corners, especially in windy areas. The only indoor model is the fire-certified Fire Resistant M1 version.
What can they be fixed to?
To any rigid support: wire mesh, fence, wooden trellis, battens or a board fixed to the wall. Use cable ties or screws with washers. The panels are not self-supporting: they must always be fixed to a suitable structure.
Can they be cut?
Yes, the grid on the back can be cut with garden shears or wire cutters to follow niches, edges, columns, windows and technical points. After cutting, just open the leaves by hand to hide the joins.
What maintenance do they need?
Practically none: no water, no pruning, no fertiliser. Outdoors, an occasional light rinse is enough; indoors, dust them with a feather duster or a jet of cold air. Avoid solvents, abrasive products and pressure washers up close.
Can I use them in a restaurant, hotel or shop?
Yes. If the venue is open to the public and fire certification is required, choose the Fire Resistant M1 version, certified class M1 and Euroclass B-s1,d0, or ask us about fire-retardant treatment for the other models: we will recommend the right solution.
Do you also install?
Yes. DIY installation is simple, but if you prefer we come to you: ask us for a quote including installation by sending the size and a few photos of the wall. Advice is free.
Tell us about your wall
Send us the size and photos of the space: we will recommend the right model and prepare a free quote, with advice and, if you like, a photo simulation.